TY - JOUR
T1 - Hardware and Software Integration as a Realist SCADA Environment to Test Protective Relaying Control
AU - Montana, Daniel Alberto Martinez
AU - Rodriguez, David Felipe Celeita
AU - Ivan Clavijo Rey, Diego
AU - Ramos, Gustavo
N1 - Funding Information:
Manuscript received July 14, 2017; revised November 13, 2017 and November 28, 2017; accepted November 28, 2017. Date of publication December 5, 2017; date of current version March 19, 2018. Paper 2017-PSPC-0778.R2, presented at the 2017 IEEE Industry Applications Society Annual Meeting, Cincinnati, OH, USA, Oct. 1–5, and approved for publication in the IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS by the Power System Protection Committee of the IEEE Industry Applications Society. This work was supported by the Administrative Department of Science, Technology, and Innovation COLCIENCIAS for doctoral students under Grant 617. (Corresponding author: David Felipe Celeita Rodriguez.) The authors are with the Department of Electrical and Electronics Engineering, Universidad de los Andes, Bogotá 111711, Colombia (e-mail: da. [email protected]; [email protected]; di.clavijo2395@ uniandes.edu.co; [email protected]).
Publisher Copyright:
© 2012 IEEE.
PY - 2018/3/1
Y1 - 2018/3/1
N2 - As the need for analyzing complex power systems increases, simulation tools make possible adding coupling strategies to interface simulations with real-time (RT) and hardware-in-the-loop (HiL) techniques. This paper introduces a novel hardware and software integration to reproduce an RT performance environment of power system simulations, especially focused on protective relaying control adjustments and training tools. The IEEE-9 bus system and a real validated model of a Colombian transmission system's section are presented; both cases are implemented in the platform and reproduced with the aim of evaluating its performance. Then, two protective relaying control applications are tested on the platform using the Colombian reduced power system (protection coordination of distance relays with infeed effect and RT emulation of end-to-end testing). The results show good performance and accurately reproduce the electrical signals of the system. The proposed interface is a novel solution, which integrates commercial power systems simulation software and robust hardware to reach RT environment with HiL.
AB - As the need for analyzing complex power systems increases, simulation tools make possible adding coupling strategies to interface simulations with real-time (RT) and hardware-in-the-loop (HiL) techniques. This paper introduces a novel hardware and software integration to reproduce an RT performance environment of power system simulations, especially focused on protective relaying control adjustments and training tools. The IEEE-9 bus system and a real validated model of a Colombian transmission system's section are presented; both cases are implemented in the platform and reproduced with the aim of evaluating its performance. Then, two protective relaying control applications are tested on the platform using the Colombian reduced power system (protection coordination of distance relays with infeed effect and RT emulation of end-to-end testing). The results show good performance and accurately reproduce the electrical signals of the system. The proposed interface is a novel solution, which integrates commercial power systems simulation software and robust hardware to reach RT environment with HiL.
UR - https://www.scopus.com/pages/publications/85037563510
UR - https://www.scopus.com/pages/publications/85037563510#tab=citedBy
U2 - 10.1109/TIA.2017.2780051
DO - 10.1109/TIA.2017.2780051
M3 - Research Article
AN - SCOPUS:85037563510
SN - 0093-9994
VL - 54
SP - 1208
EP - 1217
JO - IEEE Transactions on Industry Applications
JF - IEEE Transactions on Industry Applications
IS - 2
ER -